![]() ![]() If necessary to maintain the quiet zones during graphicĭesign where images may overlap the symbol generated, the greater-thanĪnd less-than symbols may be used as defined in Quiet zones are automatically set with the correct spacing when using Quiet zones according to ISO specifications are as follows: Barcode Type IDAutomation recommends a quiet zone approximately 3 times the thickestīar in the barcode, or about 12 times the X dimension. Fonts with "L" in the name are the largest with a height of approximately 22mm when printed at 16 points and are recommended for printing UPC-A and EAN-13 barcodes. ![]() The name are medium-height fonts and are recommended for printing EAN-8Īnd UPC-E barcodes. However, IDAutomation has observed these shorter symbols used with UPC-A and UPC-E barcodes. When using a printer with less thanĦ00 DPI, only certain font sizes may be used as defined in theįonts with "S" in the name are "shortened height" fonts that are below what the UCC recommends. These fonts should be printed at the largest point size and height possible in this range. Printed as small as 12 points and as large as 32 points. Because the standards allow a magnification factor of. IDAutomation's UPC /ĮAN barcode fonts were created according to the latest GS1, UCC, EAN, and ISO/IEC 15420 standards so that the nominal size is achieved when printed at 16 points (or 18 points for 203 DPI printers). The UPC / EAN barcode font characters are all contained in a single font represented in several different heights. This font matches the latest GS1, ANSI, ISO, and IEC 2000 specifications.īuy License Support Download Demo Release Log UPC / EAN Barcode Implementation Guidelines Font Size and Print Quality Set Rotate property.IDAutomation's UPC/EAN Barcode Font Advantage Package is an advancedįont product with encoders, macros, and source code that uses a single fontįile to create UCC-12, UPCA, UPCE, EAN8, EAN13, JAN, ISBN, and Booklandīarcodes.The font used to display text in barcode image. If Display barcode data is checked, barcode data will be displayed with the barcode. Set the Display barcode data properties.Setting up Barcode data text style in barcode image (Tab: 1D Barcode).Set the DPI property (Value is expressed in DPI - Dots per inch).If the Auto Resize property is chacked, the generated barcode image width and height will be the same as property "Image width", and "Image hight", and it will generate the maximum Bar Width and Bar Hight.Set the Left Margin, Right Margin, Top Margin and Bottom Margin properties.Set the Bar width (X) (for bar cell width) and Bar height (Y) (for bar cell height) properties.Set the Image Width and Image Height properties.Set property Unit of Measure (Unit of Measure) for properties Bar Width, Bar Height, Margins.Barcode Library will always add a check character in the last digit (modulo 10). Add checksum char property is not applied here. ![]() Provide 2 digits for barcode type UPC-A +2, and provide 5 digits for type UPC-A +5. Set the Supplement data property with the supplement value to encode.There are totally 12 digits in UPC-A barcode, first 11 digits are barcode value, and last digit is the checksum digit, which is generated by barcode library automatically. User should only provide 11 digits, and DO NOT include last digit checksum character. Set the Data property with the value to encode.Set the Barcode Type property to UPC-A or UPC-A +2 or UPC-A +5. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |